PHROZEN 3D Printer Rapid Aqua Green Resin, 405nm LCD UV-Curing Photopolymer Resin for Low Shrinkage, High Precision…

Description

Key Features

• 【Low Shrinkage & High Precision】Phrozen Aqua-Green is developed for low shrinkage and high precision printing. Its low warpage & dimensional stability are especially good for precise parts.
• 【Low Viscosity & Odor】Phrozen Aqua-Green is easy to be printed and post processed due to its low viscosity. Meanwhile its low odor will not make your place smells.
• 【Fast-Printing】Phrozen Aqua-Green is customized for 405nm LCD printer. Cure time per layer: 7 sec on Shuffle & 1.5 sec on Sonic (50µm).
• 【Wide Application】Printed parts are with good hardness and certain toughness. It is perfect match not only to models but for product prototyping.

Specification

• Weight: 500g per bottle
• XY Resolution: 50 µm
• Recommended Layer Height: 30-100 um
• Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.

Precautions

• Use and preserve resins in room temperature, dark, and ventilated condition.
• Shake well before use.
• When print finishes, keep used resins in closed & opaque bottle. Avoid mixing used resin with fresh one.
• Keep resin away from kids and away from direct sun-light exposure.
• Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cured it and treat it as general plastic garbage.

Make sure this fits by entering your model number.
【Low Shrinkage & High Precision】Phrozen Aqua-Green is developed for low shrinkage and high precision printing. Its low warpage & dimensional stability are especially good for precise parts.
【Low Viscosity & Odor】Phrozen Aqua-Green is easy to be printed and post processed due to its low viscosity. Meanwhile its low odor will not make your place smells.
【Fast-Printing】Phrozen Aqua-Green is customized for 405nm LCD printer. Cure time per layer: 7 sec on Shuffle & 1.5 sec on Sonic (50µm).
【Wide Application】Printed parts are with good hardness and certain toughness. It is perfect match not only to models but for product prototyping.
【Specification】Weight: 500g per bottle⎥XY Resolution: 50 µm⎥Recommended Layer Height: 30-100 um⎥ Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.