EPAX X1 5.5 inch 3D LCD Resin Printer
Large 3.5-inch Color TFT Touch Screen.
2K (5.5 inch) LCD screen. 2560*1440 (2k) HD LCD gives very fine printing details.
XY Resolution reaches 0.047mm
Support Anti-Aliasing which can further smooth edges!
Strong pre-calibrated platform needs little maintenance and rarely goes out of shape. The platform may be designed for simple calibration.
vat requires little effort to replace film.
Mod friendly with easy get right of entry to to keep an eye on chamber from back and bottom.
Build volume: 115mm (L) *65mm (W) *155mm (H)
Improved Z axis stability. Better Z gantry with double steel rod reinforced carriage and steel bearings.
Special anti-backlash nut to verify smoother print, further beef up print quality.
50 LED array light source rated at 40W! Even light distribution.
Sanded build platform surface making print easy to stick to platform.
Non-FEP film making print easier to come off than FEP film. Our film is a premium film for LCD, DLP and SLA printers, not just LCD. Because it is easier to release, this film makes it better to print special resins. Such as Nylon like resin, ABS like resin, High hardness resin, dental cast resin and jewelry cast resin.
Works fine with FEP films too.
Wide selection of resins. Give a boost to 405nm wave length 3D printing resins. Normal exposure time is only 6 to 7 seconds with eSUN resins. Making it much quicker to finish a print.
Slicer Software: ChiTuBox
Printer does not come with resin for simple fast shipping.
eSUN resins offered at a discount in Special Offers section.
1x extra non-FEP film
1x USB stick loaded with manual PDF file, a sample print file and a ChiTuBox config file.
1x power adapter
2x resin filters
DOES NOT come with resin.
Backed by INTSERVO’s and EPAX’s outstanding customer Give a boost to.
Make sure this fits by entering your model number.
Large 3.5-inch Color TFT Touch Screen. Robust metal build quality. Every printer is calibrated before shipping. In a position to print!
2K (5.5 inch) LCD masking screen. 2560*1440 (2k) HD masking LCD gives very fine printing details. 50 LED light source allows even light distribution and fast printing. The normal exposure time for eSUN resins is only 6 to 7 seconds for EPAX X1.
Improved Z axis gantry/stability with double steel rod reinforced carriage and steel bearings; Special anti-backlash nuts used for Z axis to produce smoother print; 40W High Energy 50 LED light source. Improved non-FEP film to have much less release force and make it imaginable to print special resins. Better than FEP film.
Give a boost to Anti-Aliasing!. Wide selection of resins. Give a boost to 405nm wave length 3D printing resins.
DOES NOT include resin. eSUN resins are offered at below Special Offers Section. One extra premium non FEP film included.